Firestik Clamp-On Flat Antenna Mount

$25.00

For 3/8″ Threaded Antennas

These stainless steel mounts were specifically designed to mount antennas on the flat side-view mirror arm supports commonly found on pick-ups. When used in this manner, there is no need to drill any holes in the vehicle or mirror support arm. Of course, either of these mounts can be used in other applications as well. The upper bracket is 4.6″ (117mm) long by 1″ (25mm) wide. The distance between the stainless steel clamping bolts (supplied) allows the mount to span material up to 1.4″ (36mm) wide. If the lower clamp is omited, the upper bracket will also serve as a flat mount for installations with a horizontal surface to bolt it to. Each bracket comes complete with either the K-4 antenna stud or the K-4A antenna stud. For general use, we recommend that these brackets be used with antennas up to 4′ (1.2m) in length

Ordering a sleeve?

Find the right size in the chart below.

Description

 

For 3/8″ Threaded Antennas – Includes clamp mount & heavy duty stud bolt

These stainless steel mounts were specifically designed to mount antennas on the flat side-view mirror arm supports commonly found on pick-ups. When used in this manner, there is no need to drill any holes in the vehicle or mirror support arm. Of course, either of these mounts can be used in other applications as well. The upper bracket is 4.6″ (117mm) long by 1″ (25mm) wide. The distance between the stainless steel clamping bolts (supplied) allows the mount to span material up to 1.4″ (36mm) wide. If the lower clamp is omited, the upper bracket will also serve as a flat mount for installations with a horizontal surface to bolt it to. Each bracket comes complete with either the K-4 antenna stud or the K-4A antenna stud. For general use, we recommend that these brackets be used with antennas up to 4′ (1.2m) in length

Additional information

Weight .75 lbs